Description
The Video Fiber Converter is designed to convert base band video signals to single-mode optic. The Converter comes with Transmitter and Receiver and must be used in a pair. It can easily extend your video signal up to 80 kilo-meters. Linear modulation and wideband low-noise circuit design is to assure transmission quality to meet NTSC specifications.
Features
- Long distance image transmission
- No RF Interference by optical fiber
- Class 1 laser product complies with EN 60825-1
Application
- RRemote monitor for traffic or industrial control
- Surveillance
- Large video wall system
Application Note
Specifications
PARAMETER |
SPECIFICATION |
NOTE |
Interface |
Transmitter unit |
4 x BNC (Female)/ Input Signal
1 x FC Optical Connector/ Output Signal |
|
Receiver unit |
4 x BNC (Female)/ Output Signal
1 x FC Optical Connector/ Input Signal |
|
Video Format |
NTSC |
|
Band Width |
8 MHz (Video) |
|
S/N |
50dB |
|
Output Voltage |
1Vpp (typical) |
|
Impedance |
75 ohm unbalanced |
|
Control Line |
RS485 |
|
Power Supply |
DC 5V |
|
Distance |
- |
|
Cable Type |
FC/FC patchcord |
|
Wave Length |
1310/1550nm (Bidirection) |
|
Operating Temperature |
-10°C ~+ 65°C |
|
Storage Temperatute |
-20°C ~+85°C |
|
Dimension |
TX unit : TBD
RX unit : TBD |
L x W x H (mm) |
Ordering Information
| Part Number |
VF-S05-02 |
Single Mode Fiber 2KM
4 x BNC (Female)
1 x FC Optical Connector
1 x RS485 uni-direction |
VF-S05-20 |
Single Mode Fiber 20KM
4 x BNC (Female)
1 x FC Optical Connector
1 x RS485 uni-direction |
VF-S50-40 |
Single Mode Fiber 40KM
4 x BNC (Female)
1 x FC Optical Connector
1 x RS485 uni-direction |
VF-S05-80 |
Single Mode Fiber 80KM
4 x BNC (Female)
1 x FC Optical Connector
1 x RS485 uni-direction |
Package Include
- HTX module x 1
- RX module x 1
- 5V adaptor x 2
- User manual
| 
