With only one CAT-5e cable, the EX-G033 series lets you extend RS-232 signal to cover the distance up to 1,000m (1,100 yards). The devices are composed of a transmitter and a receiver. The transmitter is installed near the serial signal source, and the receiver is placed near the destined device. For EX-G033B, the RX and TX relationship between source and destination units are adjustable through the settings of DIP switches. After finishing the setup, the serial connection has a fixed communication channel between local and remote sites. For EX-G033A, the same source unit as EX-G033B, but on the receiving side, the receivers can be cascadable up to 32 units. This structure allows users to control tens of remote units through single Cat-5 cable. Typical applications include security alarm system, POS system, dumb terminal, etc.

Features

• Sends RS-232 data up to 1,000m (1,100yds)
• Real time pure hardware solution
• Extra RJ-45 for cascading
• Compact size
• EX-G033A offers the ability of cascading; the remote units can be cascaded up to 32 devices.

Specifications

Hardware Installation

1.Connect your serial RS-232 source to the EX-G033B/EX-G033A transmitting unit.
2.Connect your serial receiver to the EX-G033B/EX-G033A receiving unit
3.Connect your CAT-5/5e/6 cable between the transmitting and receiving units.
4.Make sure your CAT-5/5e/6 cable is tightly connected and not loose.
5.Plug in 5V DC power cord to the power jack of the receiving unit(s).
6.Plug in 5V DC power cord to the power jack of the transmitting unit.