Introduction

The EX-G026B DVI over CAT5 Mini-Extender with EDID Learning extends your PC DVI transmission distance up to 30m (100ft) with resolution 1024x768 @60Hz. With EX-G026B, users can transmit high quality digital video of PC applications through one cost effective CAT-5/5e LAN cable to the remote monitor or projector, instead of using short and expensive DVI cables. With embedded EDID inside the extender, your PC will continue to send the digital video even when the monitor is not connected. The user can then disconnects the monitor, place it in a remote location and reconnect it without rebooting the operating system.

The EX-G026B also equips automatic EDID learning feature. While plugged to a monitor with different EDID than the stored one, EX-G026B will automatically update the content of EDID to assure the highest compatibility between PC and monitor. EX-G026B includes two identical units: transmitting and receiving units. The transmitting unit is connected to your PC DVI output and the receiving unit is connected to the monitor or projector. While successfully connected, the two LED lights on each RJ-45 connector will blink. The transmission distance between the transmitting and receiving units can be up to 30m (100ft) under XGA (1024x768@60Hz) or 15m (50ft) under UXGA (1600x1200@60Hz). With compact size and requiring no power, EX-G026B is the most cost effective choice for bringing your impressive digital video to the remote display.

Features

• DVI 1.1 compliant
• Handy DVI-D to RJ-45 adapters with automatic EDID learning feature
• Extend the transmission distance from the sources up to 30m (100ft) under XGA (1024x768 @60Hz) or 15m (50ft) under UXGA (1600x1200@60Hz)
• Identical units work at both transmitting and receiving end. Easy to install.
• No power required
• Compact size

Package Content

• 2x EX-G026B (for both TX: transmitting unit and RX: receiving unit)
• 1x User Manual

Technical Specifications

• Video Bandwidth: 4.95 Gbps (DVI 1.1)
• Input TMDS signal: 1.2 volts (peak-to-peak)
• Input DDC signal: 5 volts (peak-to-peak)
• DVI-D Connector (digital only)
• RJ-45 Connector: 2 indication LEDs
• Dimensions: 50mm x 40mm x 20mm (2" x1.6" x0.8" ) (L x W x H)
• Weight: 90g (3.2oz)