Introduction
The EX-G025 DVI to HDMI over Single CAT5 Mini-Extender extends the DVI to HDMI transmission distance up to 40m (130ft) under HD resolution 720p or 1080i. With EX-G025, users can transmit high quality digital video of PC applications through one cost effective CAT-5/5e to the remote HDMI display or projector, instead of using short and expensive DVI-HDMI cables. With embedded EDID inside the extender, your PC will continue to send the digital video even when the HDMI display is not connected.
The EX-G025 includes a transmitting unit (EX-G025-TX) and a receiving unit (EX-G025-RX). The transmitting unit is connected to your PC DVI output and the receiving unit is connected to the HDMI display or projector. While successfully connected, the two LED lights on each RJ-45 connector will blink. The transmission distance between the transmitting and receiving units can be up to 40m (130ft) under HD (720p/1080i) or 25m (80ft) under Full HD (1080p). With compact size and requiring no power, EX-G025 is the most cost effective choice for bringing your impressive digital video to the remote HDTV.

Features
- DVI 1.1 & HDMI 1.2a compliant
- Handy DVI-D to RJ-45 and HDMI to RJ-45 adapters with programmable EDID feature
- Extend the transmission length up to 40m (130ft) under HD (720p or 1080i) or 25m (80ft) under Full HD (1080p)
- No power required
- Compact size, direct plug-in
- Pure unaltered uncompressed 7.1ch digital HDMI over LAN cable transmission
- Perfectly integrated with other HDMI over CAT5 series products
Specifications
Model Name |
EX-G025 |
Technical |
EX-G025-TX aka EX-G026A |
EX-G025-RX aka EX-G076B |
Role of usage |
Transmitter [TX] |
Receiver [RX] |
HDMI compliance |
HDMI 1.2a |
DVI compliance |
DVI 1.1 |
Video bandwidth |
Single-link 165MHz [4.95Gbps] |
Video support |
Up to 1080p60, WUXGA [1920x1200@60] & UXGA [1600x1200@60] |
Transmission over LAN |
Full HD (1080p) - 25m [80ft] for CAT5e / 30m [100ft] for CAT6
HD (720p/1080i) - 40m [130ft) for CAT5e / 45m [150ft) for CAT6 |
Audio support |
No audio for DVI signal |
Equalization |
None |
Input TMDS signal |
1.2 Volts [peak-to-peak] |
Input DDC signal |
5 Volts [peak-to-peak, TTL] |
PCB stack-up |
4-layer board [impedance control — differential 100Ω; single 50Ω] |
Input |
1x DVI |
1x RJ-45 |
Output |
1x RJ-45 |
1x HDMI |
HDMI connector |
Type A [19-pin female] |
DVI connector |
DVI-I [29-pin male, digital only] |
RJ-45 connector |
WE/SS 8P8C with 2 LED indicators |

|