Description
The EX-G019 HDMI 1.3 over CAT5 Wall Plate Extender with IR Control Path wall plate edition boosts up your video/audio transmission distance up to 60m [200ft] in HDTV 720p/1080i format. With two low cost CAT-5/5e/6 LAN cables, users can readily extend HDTV sources from DVD players, Blu-ray Disc player, PS3, PC, and any other kinds of sources compliant with TMDS to distant display monitors including HDMI enabled TV sets, LCD PC monitors, or projectors. This cost effective flexibility makes HDCP compliant DVD players or PS3 transmit high quality video and audio with a greater distance at the minimal cost for wall plate application, when integrating several components apart. In addition, with the embedded infrared [IR] receiving and emitting units to facilitate the control path, users can enjoy high quality audio/video and control the HDMI sources from the remote site instantly.
The EX-G019 includes two units: EX-G019-TX as the transmitting unit and EX-G019-RX as the receiving unit. The transmitting unit is used to transfer the HDMI/DVI and IR signals input and carry the signals through two RJ-45 connectors over two low cost CAT-5/5e/6 LAN cables. The receiving unit is responsible for equalizing transferred TMDS multimedia data and re-sending IR signals. The transmission distance between the sending and receiving units can be up to 60m [200ft] under HD resolution [720p or 1080i] or 40m [130ft] under Full HD resolution [1080p]. With 8-level equalization control on the receiving unit, users can adjust the equalization scale to the received TMDS signals, and therefore optimize the transmission distance between source and destination.
Features
- HDMI 1.3c compliant
- Extends the transmission distance up to 60m [200ft] from the sources under 1080i or 720p
- Extends the transmission distance up to 40m [130ft] from the sources under 1080p
- Provides independent DDC channel, fully HDCP compliant
- Minimizes the cable skew by adjustable 8-level equalization control
- Embedded IR control path
- Pure unaltered uncompressed 7.1ch digital HDMI over LAN cable transmission
- Allows cascading
- Perfectly integrated with other HDMI over CAT5 series products
Specifications
Model Name |
EX-G006 |
EX-G009 |
EX-G019 |
Technical |
EX-G006-TX |
EX-G006-RX |
EX-G009-TX |
EX-G009-RX |
EX-G019-TX |
EX-G019-RX |
Role of usage |
Transmitter [TX] |
Receiver [RX] |
Transmitter [TX] |
Receiver [RX] |
Transmitter [TX] |
Receiver [RX] |
HDMI compliance |
HDMI 1.3c |
HDCP compliance |
Yes |
Video bandwidth |
Single-link 340MHz [10.2Gbps] |
Video support |
480i / 480p / 720p / 1080i / 1080p60 |
Transmission length over LAN cable |
Full HD [1080p] - 40m [130ft] over CAT5e / 50m [165ft] over CAT6
HD [720p/1080i] - 50m [165ft] over CAT5e / 60m [200ft] over CAT6 |
Audio support |
Surround sound (up to 7.1ch) or stereo digital audio |
Equalization |
8-level digital control at RX |
ESD protection |
Core chipset — ±8kV |
PCB stack-up |
4-layer board [impedance control — differential 100Ω; single 50Ω] |
Input TMDS signal |
1.2 Volts [peak-to-peak] |
Input DDC signal |
5 Volts [peak-to-peak, TTL] |
Input |
1x HDMI |
2x RJ-45 |
1x HDMI |
2x RJ-45
1x 3.5mm |
1x HDMI |
2x RJ-45
1x 3.5mm |
Output |
2x RJ-45 |
1x HDMI |
2x RJ-45
1x 3.5mm |
1x HDMI |
2x RJ-45
1x 3.5mm |
1x HDMI |
CEC Bypass |
No |
Switchable |
HDMI source control |
No |
Controllable through IR control path from IR receiver at receiver sites |
IR remote control |
N/A |
Electro-optical characteristics: t = 25° Carrier frequency: 38kHz |
HDMI connector |
Type A [19-pin female] |
RJ-45 connector |
WE/SS 8P8C with 2 LED indicators |
3.5mm connector |
None |
None |
IR emitter |
IR receiver |
IR emitter |
IR receiver |
Rotary control switch |
None |
EQ |
None |
EQ |
None |
EQ |
|
