Introduction
DVI (Digital Visual Interface) recently becomes an popular interface between monitor and PC. Electrical signal limits the transmission length and quality. ACE DVI extender helps DVI to transmit far away via optical fiber.
Features
- Long distance image transmission
- High resolution and image quality
- No RF Interference by optical fiber
- Class 1 laser product complies with EN 60825-1
- DVI-D single link
- CE and FCC approved
Application
- Remote monitor for traffic, industrial, military control
- LCD, Projector, Plasma display connection
- Large video wall system
- Multi-monitor for Advertising
- Ordering information
Ordering information
Part Number |
DVIE001-01 |
US Plug for AC adaptor |
DVIE001-02 |
EU Plug for AC adaptor |
DVIE001-03 |
UK Plug for AC adaptor |
DVIE001-05 |
JP Plug for AC adaptor |
Specification
PARAMETER |
SPECIFICATION |
NOTE |
Max length |
500M @ XGA
700M @XGA |
62.5/125 MMF 4-LC
50/125 MMF 4-LC |
Max resoultion |
1600 x 1200 (4:3)
1920 x 1080p (16:9)
1920 x 1200 (16:10) |
|
Max DVI bandwidth |
1.65 Gbps per channel |
Customers optional |
EDID support |
Pseudo DDC |
|
HDCP compliant |
No |
|
Operating voltage |
DC 5V |
|
Supply current |
180mA±30
280mA±30 |
TX module
RX module |
Optical property |
4 channels 850nm @-6dBm |
VCSEL |
Operating Temperature |
-0°C to 50°C |
|
Storage Temperatute |
-20°C to 75°C |
|
Dimension |
TX unit : 90 x 40 x 19.6
RX unit : 90 x 40 x 19.6 |
L x W x H (mm) |
Weight |
TX unit : 65g ; RX unit : 65g |
|
Adaptor Specification
PARAMETER |
SPECIFICATION |
NOTE |
Input |
100~240VAC |
0.2A 50~60Hz |
Output |
DC 5V |
1.0A |
DC Jack |
Inside 5V / Outside ground |
|
Resolution and Distance Reference
Resolution Mode |
Resolution |
Maximum Distance |
NOTE |
WUXGA |
1920 x 1200 (16:10) |
300m (62.5/125) / 500m (50/125) |
|
UXGA |
1600 x 1200 (4:3) |
300m (62.5/125) / 500m (50/125) |
~1.65Gbps |
TV 1080P |
1920 x 1080p (16:9) |
300m (62.5/125) / 500m (50/125) |
|
SXGA |
1280 x 1024 (5:4) |
400m (62.5/125) / 600m (50/125) |
~1.25Gbps |
XGA |
1024 x 768 (4:3) |
500m (62.5/125) / 700m (50/125) |
|
TV 1080i |
1920 x 1080p (16:9) |
500m (62.5/125) / 700m (50/125) |
~800Mbps |
TV 720p |
1280 x 720p (16:9) |
500m (62.5/125) / 700m (50/125) |
|
SVGA |
800 x 600 (4:3) |
500m (62.5/125) / 700m (50/125) |
|
Requirements
- DVI PC or DVI signal source (Transmitter)
- DVI Monitor or Projector (Receiver)
- 100~240VAC 50~60Hz 0.2A
Pseudo EDID support
There is virtual EDID data structure in TX module. This provides pseudo monitor information to the host. Then host can work at different modes by reading this data. It supports all standard modes such as VGA, SVGA, XGA, SXGA and UXGA...etc.
Dimensions
afety Regulation
CE and FCC approved.
Installation
Important: Please use the installation procedure below. Improper, or no operation may result if the start-up sequence is not correctly followed.
Step 1: Carefully unpack the contents of the shipping group. Check the following items
TX module x 1
RX module x 1
AC/DC Adaptor x 2
Plug converter x 2 (Optional)
Step 2: Connect each duplex LC fiber cable one by one as indicated number. The channel "1" of TX corresponds to channel 1 of RX. The other channels are the same connection.
Step 3: Connect the AC/DC adapter to the RX module.
Neglect AC/DC adapter to the TX module. The PC may supply voltage source via DVI receptacle.
Step 4: Plug directly the TX module in the DVI receptacle of PC. Do NOT use any intermediate cable or adapter between them.
Step 5: Plug the RX directly module in the DVI receptacle of display. Do NOT use any intermediate cable or adapter between them.
Step 6: Power on the PC and display.
| 
